This is gcc.info, produced by makeinfo version 4.0 from gcc.texi. INFO-DIR-SECTION Programming START-INFO-DIR-ENTRY * gcc: (gcc). The GNU Compiler Collection. END-INFO-DIR-ENTRY This file documents the use and the internals of the GNU compiler. Published by the Free Software Foundation 59 Temple Place - Suite 330 Boston, MA 02111-1307 USA Copyright (C) 1988, 1989, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001 Free Software Foundation, Inc. Permission is granted to copy, distribute and/or modify this document under the terms of the GNU Free Documentation License, Version 1.1 or any later version published by the Free Software Foundation; with the Invariant Sections being "GNU General Public License" and "Funding Free Software", the Front-Cover texts being (a) (see below), and with the Back-Cover Texts being (b) (see below). A copy of the license is included in the section entitled "GNU Free Documentation License". (a) The FSF's Front-Cover Text is: A GNU Manual (b) The FSF's Back-Cover Text is: You have freedom to copy and modify this GNU Manual, like GNU software. Copies published by the Free Software Foundation raise funds for GNU development.  File: gcc.info, Node: Sending Patches, Prev: gccbug, Up: Bugs Sending Patches for GCC ======================= If you would like to write bug fixes or improvements for the GNU C compiler, that is very helpful. Send suggested fixes to the patches mailing list, . Please follow these guidelines so we can study your patches efficiently. If you don't follow these guidelines, your information might still be useful, but using it will take extra work. Maintaining GNU C is a lot of work in the best of circumstances, and we can't keep up unless you do your best to help. * Send an explanation with your changes of what problem they fix or what improvement they bring about. For a bug fix, just include a copy of the bug report, and explain why the change fixes the bug. (Referring to a bug report is not as good as including it, because then we will have to look it up, and we have probably already deleted it if we've already fixed the bug.) * Always include a proper bug report for the problem you think you have fixed. We need to convince ourselves that the change is right before installing it. Even if it is right, we might have trouble judging it if we don't have a way to reproduce the problem. * Include all the comments that are appropriate to help people reading the source in the future understand why this change was needed. * Don't mix together changes made for different reasons. Send them _individually_. If you make two changes for separate reasons, then we might not want to install them both. We might want to install just one. If you send them all jumbled together in a single set of diffs, we have to do extra work to disentangle them--to figure out which parts of the change serve which purpose. If we don't have time for this, we might have to ignore your changes entirely. If you send each change as soon as you have written it, with its own explanation, then the two changes never get tangled up, and we can consider each one properly without any extra work to disentangle them. Ideally, each change you send should be impossible to subdivide into parts that we might want to consider separately, because each of its parts gets its motivation from the other parts. * Send each change as soon as that change is finished. Sometimes people think they are helping us by accumulating many changes to send them all together. As explained above, this is absolutely the worst thing you could do. Since you should send each change separately, you might as well send it right away. That gives us the option of installing it immediately if it is important. * Use `diff -c' to make your diffs. Diffs without context are hard for us to install reliably. More than that, they make it hard for us to study the diffs to decide whether we want to install them. Unidiff format is better than contextless diffs, but not as easy to read as `-c' format. If you have GNU diff, use `diff -cp', which shows the name of the function that each change occurs in. * Write the change log entries for your changes. We get lots of changes, and we don't have time to do all the change log writing ourselves. Read the `ChangeLog' file to see what sorts of information to put in, and to learn the style that we use. The purpose of the change log is to show people where to find what was changed. So you need to be specific about what functions you changed; in large functions, it's often helpful to indicate where within the function the change was. On the other hand, once you have shown people where to find the change, you need not explain its purpose. Thus, if you add a new function, all you need to say about it is that it is new. If you feel that the purpose needs explaining, it probably does--but the explanation will be much more useful if you put it in comments in the code. If you would like your name to appear in the header line for who made the change, send us the header line. * When you write the fix, keep in mind that we can't install a change that would break other systems. People often suggest fixing a problem by changing machine-independent files such as `toplev.c' to do something special that a particular system needs. Sometimes it is totally obvious that such changes would break GCC for almost all users. We can't possibly make a change like that. At best it might tell us how to write another patch that would solve the problem acceptably. Sometimes people send fixes that _might_ be an improvement in general--but it is hard to be sure of this. It's hard to install such changes because we have to study them very carefully. Of course, a good explanation of the reasoning by which you concluded the change was correct can help convince us. The safest changes are changes to the configuration files for a particular machine. These are safe because they can't create new bugs on other machines. Please help us keep up with the workload by designing the patch in a form that is good to install.  File: gcc.info, Node: Service, Next: Contributing, Prev: Bugs, Up: Top How To Get Help with GCC ************************ If you need help installing, using or changing GCC, there are two ways to find it: * Send a message to a suitable network mailing list. First try (for help installing or using GCC), and if that brings no response, try . For help changing GCC, ask . If you think you have found a bug in GCC, please report it following the instructions at *note Bug Reporting::. * Look in the service directory for someone who might help you for a fee. The service directory is found at `http://www.gnu.org/prep/service.html'.  File: gcc.info, Node: Contributing, Next: VMS, Prev: Service, Up: Top Contributing to GCC Development ******************************* If you would like to help pretest GCC releases to assure they work well, our current development sources are available by CVS (see `http://gcc.gnu.org/cvs.html'). Source and binary snapshots are also available for FTP; see `http://gcc.gnu.org/snapshots.html'. If you would like to work on improvements to GCC, please read `http://gcc.gnu.org/contribute.html' and `http://gcc.gnu.org/contributewhy.html' for information on how to make useful contributions and avoid duplication of effort. Suggested projects are listed at `http://gcc.gnu.org/projects/'.  File: gcc.info, Node: VMS, Next: Makefile, Prev: Contributing, Up: Top Using GCC on VMS **************** Here is how to use GCC on VMS. * Menu: * Include Files and VMS:: Where the preprocessor looks for the include files. * Global Declarations:: How to do globaldef, globalref and globalvalue with GCC. * VMS Misc:: Misc information.  File: gcc.info, Node: Include Files and VMS, Next: Global Declarations, Up: VMS Include Files and VMS ===================== Due to the differences between the filesystems of Unix and VMS, GCC attempts to translate file names in `#include' into names that VMS will understand. The basic strategy is to prepend a prefix to the specification of the include file, convert the whole filename to a VMS filename, and then try to open the file. GCC tries various prefixes one by one until one of them succeeds: 1. The first prefix is the `GNU_CC_INCLUDE:' logical name: this is where GNU C header files are traditionally stored. If you wish to store header files in non-standard locations, then you can assign the logical `GNU_CC_INCLUDE' to be a search list, where each element of the list is suitable for use with a rooted logical. 2. The next prefix tried is `SYS$SYSROOT:[SYSLIB.]'. This is where VAX-C header files are traditionally stored. 3. If the include file specification by itself is a valid VMS filename, the preprocessor then uses this name with no prefix in an attempt to open the include file. 4. If the file specification is not a valid VMS filename (i.e. does not contain a device or a directory specifier, and contains a `/' character), the preprocessor tries to convert it from Unix syntax to VMS syntax. Conversion works like this: the first directory name becomes a device, and the rest of the directories are converted into VMS-format directory names. For example, the name `X11/foobar.h' is translated to `X11:[000000]foobar.h' or `X11:foobar.h', whichever one can be opened. This strategy allows you to assign a logical name to point to the actual location of the header files. 5. If none of these strategies succeeds, the `#include' fails. Include directives of the form: #include foobar are a common source of incompatibility between VAX-C and GCC. VAX-C treats this much like a standard `#include ' directive. That is incompatible with the ISO C behavior implemented by GCC: to expand the name `foobar' as a macro. Macro expansion should eventually yield one of the two standard formats for `#include': #include "FILE" #include If you have this problem, the best solution is to modify the source to convert the `#include' directives to one of the two standard forms. That will work with either compiler. If you want a quick and dirty fix, define the file names as macros with the proper expansion, like this: #define stdio This will work, as long as the name doesn't conflict with anything else in the program. Another source of incompatibility is that VAX-C assumes that: #include "foobar" is actually asking for the file `foobar.h'. GCC does not make this assumption, and instead takes what you ask for literally; it tries to read the file `foobar'. The best way to avoid this problem is to always specify the desired file extension in your include directives. GCC for VMS is distributed with a set of include files that is sufficient to compile most general purpose programs. Even though the GCC distribution does not contain header files to define constants and structures for some VMS system-specific functions, there is no reason why you cannot use GCC with any of these functions. You first may have to generate or create header files, either by using the public domain utility `UNSDL' (which can be found on a DECUS tape), or by extracting the relevant modules from one of the system macro libraries, and using an editor to construct a C header file. A `#include' file name cannot contain a DECNET node name. The preprocessor reports an I/O error if you attempt to use a node name, whether explicitly, or implicitly via a logical name.  File: gcc.info, Node: Global Declarations, Next: VMS Misc, Prev: Include Files and VMS, Up: VMS Global Declarations and VMS =========================== GCC does not provide the `globalref', `globaldef' and `globalvalue' keywords of VAX-C. You can get the same effect with an obscure feature of GAS, the GNU assembler. (This requires GAS version 1.39 or later.) The following macros allow you to use this feature in a fairly natural way: #ifdef __GNUC__ #define GLOBALREF(TYPE,NAME) \ TYPE NAME \ asm ("_$$PsectAttributes_GLOBALSYMBOL$$" #NAME) #define GLOBALDEF(TYPE,NAME,VALUE) \ TYPE NAME \ asm ("_$$PsectAttributes_GLOBALSYMBOL$$" #NAME) \ = VALUE #define GLOBALVALUEREF(TYPE,NAME) \ const TYPE NAME[1] \ asm ("_$$PsectAttributes_GLOBALVALUE$$" #NAME) #define GLOBALVALUEDEF(TYPE,NAME,VALUE) \ const TYPE NAME[1] \ asm ("_$$PsectAttributes_GLOBALVALUE$$" #NAME) \ = {VALUE} #else #define GLOBALREF(TYPE,NAME) \ globalref TYPE NAME #define GLOBALDEF(TYPE,NAME,VALUE) \ globaldef TYPE NAME = VALUE #define GLOBALVALUEDEF(TYPE,NAME,VALUE) \ globalvalue TYPE NAME = VALUE #define GLOBALVALUEREF(TYPE,NAME) \ globalvalue TYPE NAME #endif (The `_$$PsectAttributes_GLOBALSYMBOL' prefix at the start of the name is removed by the assembler, after it has modified the attributes of the symbol). These macros are provided in the VMS binaries distribution in a header file `GNU_HACKS.H'. An example of the usage is: GLOBALREF (int, ijk); GLOBALDEF (int, jkl, 0); The macros `GLOBALREF' and `GLOBALDEF' cannot be used straightforwardly for arrays, since there is no way to insert the array dimension into the declaration at the right place. However, you can declare an array with these macros if you first define a typedef for the array type, like this: typedef int intvector[10]; GLOBALREF (intvector, foo); Array and structure initializers will also break the macros; you can define the initializer to be a macro of its own, or you can expand the `GLOBALDEF' macro by hand. You may find a case where you wish to use the `GLOBALDEF' macro with a large array, but you are not interested in explicitly initializing each element of the array. In such cases you can use an initializer like: `{0,}', which will initialize the entire array to `0'. A shortcoming of this implementation is that a variable declared with `GLOBALVALUEREF' or `GLOBALVALUEDEF' is always an array. For example, the declaration: GLOBALVALUEREF(int, ijk); declares the variable `ijk' as an array of type `int [1]'. This is done because a globalvalue is actually a constant; its "value" is what the linker would normally consider an address. That is not how an integer value works in C, but it is how an array works. So treating the symbol as an array name gives consistent results--with the exception that the value seems to have the wrong type. *Don't try to access an element of the array.* It doesn't have any elements. The array "address" may not be the address of actual storage. The fact that the symbol is an array may lead to warnings where the variable is used. Insert type casts to avoid the warnings. Here is an example; it takes advantage of the ISO C feature allowing macros that expand to use the same name as the macro itself. GLOBALVALUEREF (int, ss$_normal); GLOBALVALUEDEF (int, xyzzy,123); #ifdef __GNUC__ #define ss$_normal ((int) ss$_normal) #define xyzzy ((int) xyzzy) #endif Don't use `globaldef' or `globalref' with a variable whose type is an enumeration type; this is not implemented. Instead, make the variable an integer, and use a `globalvaluedef' for each of the enumeration values. An example of this would be: #ifdef __GNUC__ GLOBALDEF (int, color, 0); GLOBALVALUEDEF (int, RED, 0); GLOBALVALUEDEF (int, BLUE, 1); GLOBALVALUEDEF (int, GREEN, 3); #else enum globaldef color {RED, BLUE, GREEN = 3}; #endif  File: gcc.info, Node: VMS Misc, Prev: Global Declarations, Up: VMS Other VMS Issues ================ GCC automatically arranges for `main' to return 1 by default if you fail to specify an explicit return value. This will be interpreted by VMS as a status code indicating a normal successful completion. Version 1 of GCC did not provide this default. GCC on VMS works only with the GNU assembler, GAS. You need version 1.37 or later of GAS in order to produce value debugging information for the VMS debugger. Use the ordinary VMS linker with the object files produced by GAS. Under previous versions of GCC, the generated code would occasionally give strange results when linked to the sharable `VAXCRTL' library. Now this should work. A caveat for use of `const' global variables: the `const' modifier must be specified in every external declaration of the variable in all of the source files that use that variable. Otherwise the linker will issue warnings about conflicting attributes for the variable. Your program will still work despite the warnings, but the variable will be placed in writable storage. Although the VMS linker does distinguish between upper and lower case letters in global symbols, most VMS compilers convert all such symbols into upper case and most run-time library routines also have upper case names. To be able to reliably call such routines, GCC (by means of the assembler GAS) converts global symbols into upper case like other VMS compilers. However, since the usual practice in C is to distinguish case, GCC (via GAS) tries to preserve usual C behavior by augmenting each name that is not all lower case. This means truncating the name to at most 23 characters and then adding more characters at the end which encode the case pattern of those 23. Names which contain at least one dollar sign are an exception; they are converted directly into upper case without augmentation. Name augmentation yields bad results for programs that use precompiled libraries (such as Xlib) which were generated by another compiler. You can use the compiler option `/NOCASE_HACK' to inhibit augmentation; it makes external C functions and variables case-independent as is usual on VMS. Alternatively, you could write all references to the functions and variables in such libraries using lower case; this will work on VMS, but is not portable to other systems. The compiler option `/NAMES' also provides control over global name handling. Function and variable names are handled somewhat differently with GNU C++. The GNU C++ compiler performs "name mangling" on function names, which means that it adds information to the function name to describe the data types of the arguments that the function takes. One result of this is that the name of a function can become very long. Since the VMS linker only recognizes the first 31 characters in a name, special action is taken to ensure that each function and variable has a unique name that can be represented in 31 characters. If the name (plus a name augmentation, if required) is less than 32 characters in length, then no special action is performed. If the name is longer than 31 characters, the assembler (GAS) will generate a hash string based upon the function name, truncate the function name to 23 characters, and append the hash string to the truncated name. If the `/VERBOSE' compiler option is used, the assembler will print both the full and truncated names of each symbol that is truncated. The `/NOCASE_HACK' compiler option should not be used when you are compiling programs that use libg++. libg++ has several instances of objects (i.e. `Filebuf' and `filebuf') which become indistinguishable in a case-insensitive environment. This leads to cases where you need to inhibit augmentation selectively (if you were using libg++ and Xlib in the same program, for example). There is no special feature for doing this, but you can get the result by defining a macro for each mixed case symbol for which you wish to inhibit augmentation. The macro should expand into the lower case equivalent of itself. For example: #define StuDlyCapS studlycaps These macro definitions can be placed in a header file to minimize the number of changes to your source code.  File: gcc.info, Node: Makefile, Next: Portability, Prev: VMS, Up: Top Makefile Targets **************** `all' This is the default target. Depending on what your build/host/target configuration is, it coordinates all the things that need to be built. `doc' Produce info-formatted documentation. Also, `make dvi' is available for DVI-formatted documentation, and `make generated-manpages' to generate man pages. `mostlyclean' Delete the files made while building the compiler. `clean' That, and all the other files built by `make all'. `distclean' That, and all the files created by `configure'. `extraclean' That, and any temporary or intermediate files, like emacs backup files. `maintainer-clean' Distclean plus any file that can be generated from other files. Note that additional tools may be required beyond what is normally needed to build gcc. `install' Installs gcc. `uninstall' Deletes installed files. `check' Run the testsuite. This creates a `testsuite' subdirectory that has various `.sum' and `.log' files containing the results of the testing. You can run subsets with, for example, `make check-gcc'. You can specify specific tests by setting RUNTESTFLAGS to be the name of the `.exp' file, optionally followed by (for some tests) an equals and a file wildcard, like: make check-gcc RUNTESTFLAGS="execute.exp=19980413-*" Note that running the testsuite may require additional tools be installed, such as TCL or dejagnu. `bootstrap' Builds gcc three times - once with the native compiler, once with the native-built compiler it just built, and once with the compiler it built the second time. In theory, the last two should produce the same results, which `make compare' can check. Each step of this process is called a "stage", and the results of each stage N (N=1..3) are copied to a subdirectory `stageN/'. `bootstrap-lean' Like `bootstrap', except that the various stages are removed once they're no longer needed. This saves disk space. `bubblestrap' Once bootstrapped, this incrementally rebuilds each of the three stages, one at a time. It does this by "bubbling" the stages up from their stubdirectories, rebuilding them, and copying them back to their subdirectories. This will allow you to, for example, quickly rebuild a bootstrapped compiler after changing the sources, without having to do a full bootstrap. `quickstrap' Rebuilds the most recently built stage. Since each stage requires special invocation, using this target means you don't have to keep track of which stage you're on or what invocation that stage needs. `cleanstrap' Removed everything (`make clean') and rebuilds (`make bootstrap'). `stageN (N=1..4)' For each stage, moves the appropriate files to the stageN subdirectory. `unstageN (N=1..4)' Undoes the corresponding `stageN'. `restageN (N=1..4)' Undoes the corresponding `stageN' and rebuilds it with the appropriate flags. `compare' Compares the results of stages 2 and 3. This ensures that the compiler is running properly, since it should produce the same object files regardless of how it itself was compiled.  File: gcc.info, Node: Portability, Next: Interface, Prev: Makefile, Up: Top GCC and Portability ******************* The main goal of GCC was to make a good, fast compiler for machines in the class that the GNU system aims to run on: 32-bit machines that address 8-bit bytes and have several general registers. Elegance, theoretical power and simplicity are only secondary. GCC gets most of the information about the target machine from a machine description which gives an algebraic formula for each of the machine's instructions. This is a very clean way to describe the target. But when the compiler needs information that is difficult to express in this fashion, I have not hesitated to define an ad-hoc parameter to the machine description. The purpose of portability is to reduce the total work needed on the compiler; it was not of interest for its own sake. GCC does not contain machine dependent code, but it does contain code that depends on machine parameters such as endianness (whether the most significant byte has the highest or lowest address of the bytes in a word) and the availability of autoincrement addressing. In the RTL-generation pass, it is often necessary to have multiple strategies for generating code for a particular kind of syntax tree, strategies that are usable for different combinations of parameters. Often I have not tried to address all possible cases, but only the common ones or only the ones that I have encountered. As a result, a new target may require additional strategies. You will know if this happens because the compiler will call `abort'. Fortunately, the new strategies can be added in a machine-independent fashion, and will affect only the target machines that need them.  File: gcc.info, Node: Interface, Next: Passes, Prev: Portability, Up: Top Interfacing to GCC Output ************************* GCC is normally configured to use the same function calling convention normally in use on the target system. This is done with the machine-description macros described (*note Target Macros::). However, returning of structure and union values is done differently on some target machines. As a result, functions compiled with PCC returning such types cannot be called from code compiled with GCC, and vice versa. This does not cause trouble often because few Unix library routines return structures or unions. GCC code returns structures and unions that are 1, 2, 4 or 8 bytes long in the same registers used for `int' or `double' return values. (GCC typically allocates variables of such types in registers also.) Structures and unions of other sizes are returned by storing them into an address passed by the caller (usually in a register). The machine-description macros `STRUCT_VALUE' and `STRUCT_INCOMING_VALUE' tell GCC where to pass this address. By contrast, PCC on most target machines returns structures and unions of any size by copying the data into an area of static storage, and then returning the address of that storage as if it were a pointer value. The caller must copy the data from that memory area to the place where the value is wanted. This is slower than the method used by GCC, and fails to be reentrant. On some target machines, such as RISC machines and the 80386, the standard system convention is to pass to the subroutine the address of where to return the value. On these machines, GCC has been configured to be compatible with the standard compiler, when this method is used. It may not be compatible for structures of 1, 2, 4 or 8 bytes. GCC uses the system's standard convention for passing arguments. On some machines, the first few arguments are passed in registers; in others, all are passed on the stack. It would be possible to use registers for argument passing on any machine, and this would probably result in a significant speedup. But the result would be complete incompatibility with code that follows the standard convention. So this change is practical only if you are switching to GCC as the sole C compiler for the system. We may implement register argument passing on certain machines once we have a complete GNU system so that we can compile the libraries with GCC. On some machines (particularly the Sparc), certain types of arguments are passed "by invisible reference". This means that the value is stored in memory, and the address of the memory location is passed to the subroutine. If you use `longjmp', beware of automatic variables. ISO C says that automatic variables that are not declared `volatile' have undefined values after a `longjmp'. And this is all GCC promises to do, because it is very difficult to restore register variables correctly, and one of GCC's features is that it can put variables in registers without your asking it to. If you want a variable to be unaltered by `longjmp', and you don't want to write `volatile' because old C compilers don't accept it, just take the address of the variable. If a variable's address is ever taken, even if just to compute it and ignore it, then the variable cannot go in a register: { int careful; &careful; ... } Code compiled with GCC may call certain library routines. Most of them handle arithmetic for which there are no instructions. This includes multiply and divide on some machines, and floating point operations on any machine for which floating point support is disabled with `-msoft-float'. Some standard parts of the C library, such as `bcopy' or `memcpy', are also called automatically. The usual function call interface is used for calling the library routines. These library routines should be defined in the library `libgcc.a', which GCC automatically searches whenever it links a program. On machines that have multiply and divide instructions, if hardware floating point is in use, normally `libgcc.a' is not needed, but it is searched just in case. Each arithmetic function is defined in `libgcc1.c' to use the corresponding C arithmetic operator. As long as the file is compiled with another C compiler, which supports all the C arithmetic operators, this file will work portably. However, `libgcc1.c' does not work if compiled with GCC, because each arithmetic function would compile into a call to itself!  File: gcc.info, Node: Passes, Next: RTL, Prev: Interface, Up: Top Passes and Files of the Compiler ******************************** The overall control structure of the compiler is in `toplev.c'. This file is responsible for initialization, decoding arguments, opening and closing files, and sequencing the passes. The parsing pass is invoked only once, to parse the entire input. The RTL intermediate code for a function is generated as the function is parsed, a statement at a time. Each statement is read in as a syntax tree and then converted to RTL; then the storage for the tree for the statement is reclaimed. Storage for types (and the expressions for their sizes), declarations, and a representation of the binding contours and how they nest, remain until the function is finished being compiled; these are all needed to output the debugging information. Each time the parsing pass reads a complete function definition or top-level declaration, it calls either the function `rest_of_compilation', or the function `rest_of_decl_compilation' in `toplev.c', which are responsible for all further processing necessary, ending with output of the assembler language. All other compiler passes run, in sequence, within `rest_of_compilation'. When that function returns from compiling a function definition, the storage used for that function definition's compilation is entirely freed, unless it is an inline function (*note An Inline Function is As Fast As a Macro: Inline.). Here is a list of all the passes of the compiler and their source files. Also included is a description of where debugging dumps can be requested with `-d' options. * Parsing. This pass reads the entire text of a function definition, constructing partial syntax trees. This and RTL generation are no longer truly separate passes (formerly they were), but it is easier to think of them as separate. The tree representation does not entirely follow C syntax, because it is intended to support other languages as well. Language-specific data type analysis is also done in this pass, and every tree node that represents an expression has a data type attached. Variables are represented as declaration nodes. Constant folding and some arithmetic simplifications are also done during this pass. The language-independent source files for parsing are `stor-layout.c', `fold-const.c', and `tree.c'. There are also header files `tree.h' and `tree.def' which define the format of the tree representation. The source files to parse C are `c-parse.in', `c-decl.c', `c-typeck.c', `c-aux-info.c', `c-convert.c', and `c-lang.c' along with header files `c-lex.h', and `c-tree.h'. The source files for parsing C++ are in `cp/'. They are `parse.y', `class.c', `cvt.c', `decl.c', `decl2.c', `except.c', `expr.c', `init.c', `lex.c', `method.c', `ptree.c', `search.c', `tree.c', `typeck2.c', and `typeck.c', along with header files `cp-tree.def', `cp-tree.h', and `decl.h'. The special source files for parsing Objective C are in `objc/'. They are `objc-parse.y', `objc-act.c', `objc-tree.def', and `objc-act.h'. Certain C-specific files are used for this as well. The file `c-common.c' is also used for all of the above languages. * RTL generation. This is the conversion of syntax tree into RTL code. It is actually done statement-by-statement during parsing, but for most purposes it can be thought of as a separate pass. This is where the bulk of target-parameter-dependent code is found, since often it is necessary for strategies to apply only when certain standard kinds of instructions are available. The purpose of named instruction patterns is to provide this information to the RTL generation pass. Optimization is done in this pass for `if'-conditions that are comparisons, boolean operations or conditional expressions. Tail recursion is detected at this time also. Decisions are made about how best to arrange loops and how to output `switch' statements. The source files for RTL generation include `stmt.c', `calls.c', `expr.c', `explow.c', `expmed.c', `function.c', `optabs.c' and `emit-rtl.c'. Also, the file `insn-emit.c', generated from the machine description by the program `genemit', is used in this pass. The header file `expr.h' is used for communication within this pass. The header files `insn-flags.h' and `insn-codes.h', generated from the machine description by the programs `genflags' and `gencodes', tell this pass which standard names are available for use and which patterns correspond to them. Aside from debugging information output, none of the following passes refers to the tree structure representation of the function (only part of which is saved). The decision of whether the function can and should be expanded inline in its subsequent callers is made at the end of rtl generation. The function must meet certain criteria, currently related to the size of the function and the types and number of parameters it has. Note that this function may contain loops, recursive calls to itself (tail-recursive functions can be inlined!), gotos, in short, all constructs supported by GCC. The file `integrate.c' contains the code to save a function's rtl for later inlining and to inline that rtl when the function is called. The header file `integrate.h' is also used for this purpose. The option `-dr' causes a debugging dump of the RTL code after this pass. This dump file's name is made by appending `.rtl' to the input file name. * Jump optimization. This pass simplifies jumps to the following instruction, jumps across jumps, and jumps to jumps. It deletes unreferenced labels and unreachable code, except that unreachable code that contains a loop is not recognized as unreachable in this pass. (Such loops are deleted later in the basic block analysis.) It also converts some code originally written with jumps into sequences of instructions that directly set values from the results of comparisons, if the machine has such instructions. Jump optimization is performed two or three times. The first time is immediately following RTL generation. The second time is after CSE, but only if CSE says repeated jump optimization is needed. The last time is right before the final pass. That time, cross-jumping and deletion of no-op move instructions are done together with the optimizations described above. The source file of this pass is `jump.c'. The option `-dj' causes a debugging dump of the RTL code after this pass is run for the first time. This dump file's name is made by appending `.jump' to the input file name. * Register scan. This pass finds the first and last use of each register, as a guide for common subexpression elimination. Its source is in `regclass.c'. * Jump threading. This pass detects a condition jump that branches to an identical or inverse test. Such jumps can be `threaded' through the second conditional test. The source code for this pass is in `jump.c'. This optimization is only performed if `-fthread-jumps' is enabled. * Common subexpression elimination. This pass also does constant propagation. Its source file is `cse.c'. If constant propagation causes conditional jumps to become unconditional or to become no-ops, jump optimization is run again when CSE is finished. The option `-ds' causes a debugging dump of the RTL code after this pass. This dump file's name is made by appending `.cse' to the input file name. * Global common subexpression elimination. This pass performs GCSE using Morel-Renvoise Partial Redundancy Elimination, with the exception that it does not try to move invariants out of loops - that is left to the loop optimization pass. This pass also performs global constant and copy propagation. The source file for this pass is gcse.c. The option `-dG' causes a debugging dump of the RTL code after this pass. This dump file's name is made by appending `.gcse' to the input file name. * Loop optimization. This pass moves constant expressions out of loops, and optionally does strength-reduction and loop unrolling as well. Its source files are `loop.c' and `unroll.c', plus the header `loop.h' used for communication between them. Loop unrolling uses some functions in `integrate.c' and the header `integrate.h'. The option `-dL' causes a debugging dump of the RTL code after this pass. This dump file's name is made by appending `.loop' to the input file name. * If `-frerun-cse-after-loop' was enabled, a second common subexpression elimination pass is performed after the loop optimization pass. Jump threading is also done again at this time if it was specified. The option `-dt' causes a debugging dump of the RTL code after this pass. This dump file's name is made by appending `.cse2' to the input file name. * Data flow analysis (`flow.c'). This pass divides the program into basic blocks (and in the process deletes unreachable loops); then it computes which pseudo-registers are live at each point in the program, and makes the first instruction that uses a value point at the instruction that computed the value. This pass also deletes computations whose results are never used, and combines memory references with add or subtract instructions to make autoincrement or autodecrement addressing. The option `-df' causes a debugging dump of the RTL code after this pass. This dump file's name is made by appending `.flow' to the input file name. If stupid register allocation is in use, this dump file reflects the full results of such allocation. * Instruction combination (`combine.c'). This pass attempts to combine groups of two or three instructions that are related by data flow into single instructions. It combines the RTL expressions for the instructions by substitution, simplifies the result using algebra, and then attempts to match the result against the machine description. The option `-dc' causes a debugging dump of the RTL code after this pass. This dump file's name is made by appending `.combine' to the input file name. * Register movement (`regmove.c'). This pass looks for cases where matching constraints would force an instruction to need a reload, and this reload would be a register to register move. It then attempts to change the registers used by the instruction to avoid the move instruction. The option `-dN' causes a debugging dump of the RTL code after this pass. This dump file's name is made by appending `.regmove' to the input file name. * Instruction scheduling (`sched.c'). This pass looks for instructions whose output will not be available by the time that it is used in subsequent instructions. (Memory loads and floating point instructions often have this behavior on RISC machines). It re-orders instructions within a basic block to try to separate the definition and use of items that otherwise would cause pipeline stalls. Instruction scheduling is performed twice. The first time is immediately after instruction combination and the second is immediately after reload. The option `-dS' causes a debugging dump of the RTL code after this pass is run for the first time. The dump file's name is made by appending `.sched' to the input file name. * Register class preferencing. The RTL code is scanned to find out which register class is best for each pseudo register. The source file is `regclass.c'. * Local register allocation (`local-alloc.c'). This pass allocates hard registers to pseudo registers that are used only within one basic block. Because the basic block is linear, it can use fast and powerful techniques to do a very good job. The option `-dl' causes a debugging dump of the RTL code after this pass. This dump file's name is made by appending `.lreg' to the input file name. * Global register allocation (`global.c'). This pass allocates hard registers for the remaining pseudo registers (those whose life spans are not contained in one basic block). * Reloading. This pass renumbers pseudo registers with the hardware registers numbers they were allocated. Pseudo registers that did not get hard registers are replaced with stack slots. Then it finds instructions that are invalid because a value has failed to end up in a register, or has ended up in a register of the wrong kind. It fixes up these instructions by reloading the problematical values temporarily into registers. Additional instructions are generated to do the copying. The reload pass also optionally eliminates the frame pointer and inserts instructions to save and restore call-clobbered registers around calls. Source files are `reload.c' and `reload1.c', plus the header `reload.h' used for communication between them. The option `-dg' causes a debugging dump of the RTL code after this pass. This dump file's name is made by appending `.greg' to the input file name. * Instruction scheduling is repeated here to try to avoid pipeline stalls due to memory loads generated for spilled pseudo registers. The option `-dR' causes a debugging dump of the RTL code after this pass. This dump file's name is made by appending `.sched2' to the input file name. * Jump optimization is repeated, this time including cross-jumping and deletion of no-op move instructions. The option `-dJ' causes a debugging dump of the RTL code after this pass. This dump file's name is made by appending `.jump2' to the input file name. * Delayed branch scheduling. This optional pass attempts to find instructions that can go into the delay slots of other instructions, usually jumps and calls. The source file name is `reorg.c'. The option `-dd' causes a debugging dump of the RTL code after this pass. This dump file's name is made by appending `.dbr' to the input file name. * Branch shortening. On many RISC machines, branch instructions have a limited range. Thus, longer sequences of instructions must be used for long branches. In this pass, the compiler figures out what how far each instruction will be from each other instruction, and therefore whether the usual instructions, or the longer sequences, must be used for each branch. * Conversion from usage of some hard registers to usage of a register stack may be done at this point. Currently, this is supported only for the floating-point registers of the Intel 80387 coprocessor. The source file name is `reg-stack.c'. The options `-dk' causes a debugging dump of the RTL code after this pass. This dump file's name is made by appending `.stack' to the input file name. * Final. This pass outputs the assembler code for the function. It is also responsible for identifying spurious test and compare instructions. Machine-specific peephole optimizations are performed at the same time. The function entry and exit sequences are generated directly as assembler code in this pass; they never exist as RTL. The source files are `final.c' plus `insn-output.c'; the latter is generated automatically from the machine description by the tool `genoutput'. The header file `conditions.h' is used for communication between these files. * Debugging information output. This is run after final because it must output the stack slot offsets for pseudo registers that did not get hard registers. Source files are `dbxout.c' for DBX symbol table format, `sdbout.c' for SDB symbol table format, and `dwarfout.c' for DWARF symbol table format. Some additional files are used by all or many passes: * Every pass uses `machmode.def' and `machmode.h' which define the machine modes. * Several passes use `real.h', which defines the default representation of floating point constants and how to operate on them. * All the passes that work with RTL use the header files `rtl.h' and `rtl.def', and subroutines in file `rtl.c'. The tools `gen*' also use these files to read and work with the machine description RTL. * Several passes refer to the header file `insn-config.h' which contains a few parameters (C macro definitions) generated automatically from the machine description RTL by the tool `genconfig'. * Several passes use the instruction recognizer, which consists of `recog.c' and `recog.h', plus the files `insn-recog.c' and `insn-extract.c' that are generated automatically from the machine description by the tools `genrecog' and `genextract'. * Several passes use the header files `regs.h' which defines the information recorded about pseudo register usage, and `basic-block.h' which defines the information recorded about basic blocks. * `hard-reg-set.h' defines the type `HARD_REG_SET', a bit-vector with a bit for each hard register, and some macros to manipulate it. This type is just `int' if the machine has few enough hard registers; otherwise it is an array of `int' and some of the macros expand into loops. * Several passes use instruction attributes. A definition of the attributes defined for a particular machine is in file `insn-attr.h', which is generated from the machine description by the program `genattr'. The file `insn-attrtab.c' contains subroutines to obtain the attribute values for insns. It is generated from the machine description by the program `genattrtab'.  File: gcc.info, Node: RTL, Next: Machine Desc, Prev: Passes, Up: Top RTL Representation ****************** Most of the work of the compiler is done on an intermediate representation called register transfer language. In this language, the instructions to be output are described, pretty much one by one, in an algebraic form that describes what the instruction does. RTL is inspired by Lisp lists. It has both an internal form, made up of structures that point at other structures, and a textual form that is used in the machine description and in printed debugging dumps. The textual form uses nested parentheses to indicate the pointers in the internal form. * Menu: * RTL Objects:: Expressions vs vectors vs strings vs integers. * RTL Classes:: Categories of RTL expresion objects, and their structure. * Accessors:: Macros to access expression operands or vector elts. * Flags:: Other flags in an RTL expression. * Machine Modes:: Describing the size and format of a datum. * Constants:: Expressions with constant values. * Regs and Memory:: Expressions representing register contents or memory. * Arithmetic:: Expressions representing arithmetic on other expressions. * Comparisons:: Expressions representing comparison of expressions. * Bit Fields:: Expressions representing bitfields in memory or reg. * Vector Operations:: Expressions involving vector datatypes. * Conversions:: Extending, truncating, floating or fixing. * RTL Declarations:: Declaring volatility, constancy, etc. * Side Effects:: Expressions for storing in registers, etc. * Incdec:: Embedded side-effects for autoincrement addressing. * Assembler:: Representing `asm' with operands. * Insns:: Expression types for entire insns. * Calls:: RTL representation of function call insns. * Sharing:: Some expressions are unique; others *must* be copied. * Reading RTL:: Reading textual RTL from a file.