================================================================================
   Renesas USB MCU USB Basic Firmware mini Rev.2.00

                                                                      Mar.26.13
                                                 Renesas Electronics Corporation
                                                   Renesas Solutions Corporation
================================================================================

1. Preface
    "Renesas USB MCU USB Basic Firmware mini" 
    (hereinafter referred to as USB-BASIC-F/W) was developed as a reference 
    program when customers developed the USB control program of the RL78 Series 
    or R8C Series.
    Extract and use those compression files, only when agree the following 
    copyright and limitation items. Delete those compression files at 
    once in the case of others.

2. Copyright, Disclaimer
    This program is a free software. The author, Renesas Electronics 
    Corporation and Renesas Solutions Corporation have a copyright.

    Renesas Electronics Corporation and Renesas Solutions Corporation 
    assume no responsibility for any damage, originating in the use 
    of this programs, and algorithms.

    The program may contain technical inaccuracies or typographical 
    errors. Renesas Electronics Corporation and Renesas Solutions 
    Corporation assume no responsibility for any damage, liability, 
    or other loss rising from these inaccuracies or errors.

    When using programs, algorithms, and any or all of the technical 
    information contained in the program, please be sure to evaluate all
    information as a total system before making a final decision on the 
    applicability of the information and products. Renesas Electronics 
    Corporation and Renesas Solutions Corporation assume no responsibility 
    for any damage, liability or other loss resulting from the information 
    contained herein.

    The program is not designed or manufactured for use in a device or 
    system that is used under circumstances in which human life is 
    potentially at stake. Please contact Renesas Electronics Corporation 
    or an authorized Renesas semiconductor production distributor when 
    considering the use of a product contained herein for any specific 
    purposes, such as apparatus or systems for transportation, vehicular, 
    medical, aerospace, nuclear, or undersea repeater use.

3. Limitation Item
    This program can be used only for Renesas USB semiconductors. Do 
    not be used toward other manufacturer's products.

4. Reprinting, Reproduction
    The prior written approval of Renesas Electronics Corporation and 
    Renesas Solutions Corporation is necessary to reprint or reproduce 
    in whole or in part this program.


5. About Supporting
    This program is to refrain from the inquiry about the program 
    because it is free software.

    The program, algorithms and all the other Electronics contents 
    represent information at the time of publication of the program, 
    and is subject to change by Renesas Electronics Corporation and 
    Renesas Solutions Corporation without notice. 

    It is therefore recommended that customers contact Renesas Electronics 
    Corporation or an authorized Renesas semiconductor production distributor 
    for the latest product information.

    Renesas Electronics Corporation homepage is http://www.renesas.com/
    

6. File Composition
  USB Basic Host and Peripheral Firmware folder composition and 
  file are shown as follows. 
  
  an_r01an0326ej0201_usb
    �{�\workspace
    �b  �{�\RL78_USB_sample_StdFWmini_Rev200
    �b  �b  Renesas USB MCU USB Basic Firmware mini Rev.2.00 for HEW/CubeSuite+
    �b  �{�\RL78_USB_sample_StdFWmini_Rev200_IAR
    �b      Renesas USB MCU USB Basic Firmware mini Rev.2.00 for IAR
    �{�\Renesas USB MCU USB Basic Firmware mini Rev.2.00
    �b  Application Note(r01an0326ej0201_usb.pdf)
    �{�\Read1st_BASIC.txt


7. Note
  (1). About "HwResourceForUSB" folder
       HwResourceForUSB folder is a folder for RL78/G1C RSK in the released package.
       Please change the folder name of the device that the customer uses.
       
       e.g) (When using RL78/G1C RSK)
         HwResourceForUSB_G1C_RSK --> HwResourceForUSB
       
       The source codes dependent on each device and evaluation board are 
       stored in each HwResourceForUSB folder.