SIXAXIS / DUALSHOCK3 HID Minidriver (USB) DX Beta version


  I am not good at English. 
  Probably many errors will be included in contents. 
  Please refer to Japanese explanation if possible.

  I used Yahoo! JAPAN-Honyaku for translation.


Introduction
------------
  This software is a device driver to use PLAYSTATION3 SIXAXIS/DUALSHOCK3
  Controller for Windows PC.
�@You can use a controller by a type of following either.
  -4 axes and 19 buttons
  -6 axes, 1 hat-switch, 2 sliders, 19 buttons


Caution
-------
  This software is no guarantee. 
  Please use it by a self-responsibility.


System Requirements
-------------------
  32-bit Windows XP/Server 2003/Vista
  Sony PLAYSTATION3 SIXAXIS/DUALSHOCK3 Controller
  USB cable

�@note:This software may work in the Windows 2000.


Install
-------
   - Connect SIXAXIS/DUALSHOCK3 Controller to USB port.
   - Select 'USB Human Interface Device' from Device Manager.
     At this time, choose a thing including 'USB\VID_054C&PID_0268' as
     Device Instance ID of Details tab of Properties.
   - Press 'Update Driver' button at Driver tab of Properties.
   - When Hardware Update Wizard began, choose 'No,not this time'.
   - choose 'Install from a list or specific location'.
   - choose 'Don't search. I will choose the driver to install.'.
   - press 'Have Disk'.
   - Select 'dualshock3.inf' file.


Upgrade
-------
   - Select 'SIXAXIS/DUALSHOCK3 DX (USB) Beta' from Device Manager.
   - Press 'Update Driver' button at Driver tab of Properties.
   - When Hardware Update Wizard began, choose 'No,not this time'.
   - choose 'Install from a list or specific location'.
   - choose 'Don't search. I will choose the driver to install.'.
   - press 'Have Disk'.
   - Select 'dualshock3.inf' file.


Uninstall
---------
   - Select 'SIXAXIS/DUALSHOCK3 DX (USB) Beta' from Device Manager.
   - Press 'Uninstall' button at Driver tab of Properties.
   - Delete 'dualshock3.inf' file from System folder\inf
   - Delete 'dualshock3.sys' file from System folder\system32\driver


Usage
-----
  After driver start, it is necessary to push the PS button once.


Auto Fire
---------
  While a driver works, the auto fire function can change setting.

  1.The usage of auto fire function
    Enable a auto fire function with setting software.

�@2.A shift method to the auto fire setting mode
    This shifts by pushing the specific button(s)(default is PS button) of
    the controller during a little.

    It is necessary for you to perform following setting while pushing this
    button(s).

  3.Auto fire settings
    Push the button which wants to set an auto fire during a little.
    It is removed when you push it again.

  4.A change method of the auto fire speed
    When you change blaze speed, you use the analog stick
    (default is right side).
    It is changed four speed in up, down, right and left.

  5.A method to leave auto fire setting
    You can leave setting by getting a finger off a function button(s).


E-mail
------
�@E-mail Address: tamamy_ikesu@yahoo.co.jp